Suitable for the following Canon EOS DSLR cameras:
* 1D Mark IV / 1D Mark III / 1D Mark II N / 1D Mark II
* 5D Mark II / 7D / 5D
* 60D / 50D / 40D / 30D / 20D / 10D
* 550D (Rebel T2i) / 500D (Rebel T1i) / 450D (Rebel XSi) / 400D (Rebel XTi) / 350D (Rebel XT)/ 300D (Rebel X)
* 1000D (Rebel XS/Kiss F)
Overview
Nissin Di622 is compatible with Canon's E-TTL and E-TTL II system. Those new digital TTL flash systems control the flash light with greater precision and stability. The light distribution angle is automatically adjusted for the lens focal length. A high quality stepping motor sharply traces the lens movement with the same speed as that of the camera manufacturer's original flash model.
The flash beam covers the frame from 14mm (with a wide angle diffuser built-in) to 70mm of the digital lens.(*) For a longer lens, the flash head reflector position stays at 70mm. It turns 90 degrees upward and 270 degrees horizontally for bounce lighting.
The flash head also stores a small reflection panel for fill-in shots.
(*) The focal length for the traditional SLR camera is to be multiplied by a factor of 1.5.
The Nissin Di622 Mark II has a wireless remote flash system as a slave unit. You can enjoy creative flash photography with multiple lightings from the various directions. There are 3 slave modes provided. Slave Digital (SD): Di622 Mark II synchronizes to the pre-flash system. The master flash is to be set at TTL (E-TTL for Canon and i-TTL for Nikon) mode. Slave Film (SF): Di622 Mark II synchronizes to the traditional single flash system. The master flash is to be set at manual mode. Studio lighting system synchronizes to this mode. This mode is also available for open flash, and for a standard flash in the market. Wireless TTL: Di622 Mark II synchronizes to the wireless remote flash system. The master flash is to be set at Channel 1 group A in wireless remote mode.
* Usable camera : CANON digital camera
* Guide Number : 44m, 145ft. (ISO 100), 62m, 205ft. (ISO 200)
* Illumination coverage : 24-105mm (16mm wide angle diffuser)
* Turning head : 90 degree upward, 90 degree to left, 180 degree to right
* Power source : 4 X AA or equivalent Mi-MH, lithium
* Number of flashes : 200-1500 flashes by fresh alkaline batteries
* Energy saving system : 2 minutes to stand-by mode, 30 minutes to shut down after the power on or the last use of flash unit
* Recycling time : 5 sec., with fresh alkaline batteries.
* Flash exposure control :
E-TTL and E-TTL II for Canon cameras
i-TTL for Nikon cameras
* Manual (Variable power) :
6 levels : Full - 1/2 - 1/4 - 1/8 - 1/16 - 1/32 powers
* Wireless mode :
SD: Slave Digital (with 6 level)
SF: Slave Film (with 6 level)
Wireless TTL remote Channel 1 Group A (Controlled by master flash)
* Flash Power Lock:
FE lock (for Canon) / FV lock (for Nikon)
* My TTL Setting
* AF Assist light : Infrared LED for distance of 0.7 to 6 meter.
* Color temperature : 5,600K (same as daylight)
* Flash duration : 1/800sec. to 1/20,000sec.
* Camera contact : Hotshoe , X-contact, External Synchro socket
* Accessories included : Shoe stand, pouch
* Dimensions : 77(W) x 130(D) x103(H) mm / 30(W) x 51(D) x 40(H) inches
* Weight : 315g (without battery) / 11oz
- Nissin Di622 Mark II Digital (Canon Mount) Speedlite e-TTL Flash in original box
- Speedlite Stand
- Soft Case
- Instruction Manual (To be downloaded here)
- 12 months warranty
